Board-on-Board Fence Calculator

Welcome to this board-on-board fence calculator, a tool created to know:

• How many pickets a board-on-board fence needs;
• How many sections (aka panels) the board-on-board fence requires in total; and
• Many more!

Keep reading this article to learn more about board-on-board privacy fences, the formulas, and how they differ from conventional fences.

A fence typically consists of vertical boards or pickets attached to horizontal rails and located a distance apart, leaving gaps that allow air and light to pass through.

For total privacy, we can leave zero gaps between the pickets. Nevertheless, there's an issue: the wood can shrink, diminishing the width of the pickets and creating new openings. Fortunately, the board-on-board wood fence solves that.

In a board-on-board wood fence, we place each picket on top of another to compensate for future shrinkages.

For a board-on-board fence, we calculate the posts, rails, and sections (panels) as in a conventional fence (look at the formulas in our fence calculator).

The difference relies on how we calculate the number of pickets:

In the previous formula:

• You must input the fence length, picket width, and picket overlap all in the same units.
• If you obtain a decimal, round it up to the nearest integer (e.g., 4.6 ≈ 5 and 4.1 ≈ 5).

• We recommend using a picket overlap at least two times the expected width shrinkage.
• In the worst case, that shrinkage will be 12% of the width.
• Therefore, the rule of thumb is to use a picket overlap of 24% of the picket width.
• Of course, that space must be enough to join the adjacent pickets.

• Post hole concrete calculator;
• Fence estimate calculator;
• Fence picket calculator;
• Wood fence calculator;
• Fence material calculator; and
• Privacy fence calculator.

The recommended picket overlap for a board-on-board fence ranges from one to three inches, depending on the picket width and wood shrinkage:

• For a 3½" picket width, a 0.8" overlap will be enough;
• For a 5½" width, a 1.3" overlap is ok; or
• For an 11½" width, you can use a 2.8" overlap.

To know how many pickets per 8-foot section your board-on-board fence needs, consider the width and overlapping:

• If you use pickets of 5½" width with a 1½" overlapping, you need 24 pickets per section;
• If you use pickets of 3½" width with a 1" overlapping, you need 38 pickets per section; and
• For other widths or overlappings, use our board-on-board fence calculator.